Home esr Products Inquiry ToD Imprint Contact
Language: deutsch english
Thick film resistor

SMDC 0603

print version

Data sheet Download PDF
Length  1.60±0.15 
Width  0.80±0.10 
Height  0.45±0.10 
I1  0.30±0.20 
I2  0.30±0.20 
Tolerances and Resistance ranges
Power rating at 70°C  1/10 W 
Operation temp. range  -55°C ~ +155°C 
Max. working voltage  50 V 
Max. overload voltage  100 V 
TCR ± 100ppm/°C  10 Ω ≤ R < 1 MΩ 
TCR ± 200ppm/°C  1 Ω ≤ R < 9R75 Ω; 1M02 Ω ≤ R ≤ 20 MΩ 
TCR ± 400ppm/°C  20 MΩ ≤ R ≤ 100 MΩ 
Test Conditions Requirements
MIL-STD-202F, Method 304 Temperature coefficient  +25/-55/+25/+125/+25°C  by Type 
MIL-STD-202F, Method 107 Thermal shock  100 Cycles, -55°C to +150°C  ±(1%+0.05Ω) 
JIS-C-5202-5.5 Short time overload  RCWV*2.5 or Max Overloading Voltage, 5 sec.  ±(2%+0.05Ω) 
JIS-C-5202-7.2 Resistance to Dry Heat  96h at +155°C without load  ±(2%+0.05Ω) 
MIL-STD-202F, Method 108A Load Life  RCWV, 70°C, 1.5h on, 0.5h off, total 1000~1048h  ±(3%+0.05Ω) 
MIL-STD-202F, Method 210E Resistance to soldering heat  260±5°C for 10 seconds  ±(1%+0.05Ω) 
MIL-STD-202F, Method 103 Moisture resistance  40°C, 90~95%, RCWV 1.5h on, 0.5h off, total 1000~1048h  ±(2%+0.05Ω) 
JIS-C-5202-7.1 Low temperature operation  One hour at -65°C followed by 45 minutes RCWV  ±(1%+0.05Ω) 
JIS-C-5202-6.1.4 Bending strength  3mm deflection in either direction for 10 sec.  ±(1%+0.05Ω) 
MIL-STD-202F, Method 208H Solderability  245±5°C for 5±0.5 sec.  >95% coverage 
Order example
Type  SMDC 0603 
Rated resistance  2K 
Tolerance  1% 
TC  200