Home esr Products Inquiry ToD Imprint Contact
Language: deutsch english
Metal film resistor

SMDR 2010

print version

Data sheet Download PDF
Length  4.90±0.15 
Width  2.40±0.15 
Height  0.55±0.10 
I1  0.60±0.30 
I2  0.50±0.25 
TC, Resistance ranges and tolerances
TC ± 15
0,1%  25R - 1M 
0,25%  25R - 1M 
0,5%  25R - 1M 
TC ± 25
0,1%  10R - 1M5 
0,25%  10R - 1M5 
0,5%  10R - 1M5 
TC ± 50
0,1%  10R - 1M5 
0,25%  10R - 1M5 
0,5%  10R - 1M5 
Resistance range in E192 (special value on request)  10Ω - 1M5Ω 
Resistance tolerance  ±0,1% 
Operating mode: Standard
Power rating at 70°C  1/4W 
Operation temperature range  -55°C - +155°C 
Max. working voltage  150V 
Temperature coefficient  ±15ppm/°C; ±25ppm/°C; ±50ppm/°C (±10ppm/°C; ±15ppm/°C on request) 
Max. overload voltage  300V 
Test Conditions Requirements
MIL-STD-202F, Method 304 Temperature coefficient  +25/-55/+25/+125/+25°C  by Type 
JIS-C-5202-5.5 Short time overload  2.5 times RCWV for 2 seconds  ΔR ±0.02% 
MIL-STD-202F, Method 107G Thermal shock  100 cycles. -55°C to +150°C  ΔR ±0.02% 
MIL-STD-202F, Method 108A  Load Life  RCWV, 70°C, 1.5h on, 0.5h off, total 1000~1048h   ΔR ±0.05% 
MIL-STD-202F, Method 103F Humidity (steady state)  40°C, 90~95%, RCWV 1.5h on, 0.5h off, total 1000~1048h  ΔR ±0.05% 
JIS-C-5202-7.2 Resistance to Dry Heat  1000h bei 125°C without load  dr ±0.05% 
MIL-STD-202F, Method 208H Solderability  245°C±5°C, 5±0.5sec  >95% min. coverage 
MIL-STD-202F, Method 210E Resistance to soldering heat  260±5°C, 10±1sec  ΔR ±0.02% 
Order example
Type  SMDR 2010 
Rated resistance  2K 
Tolerance  0,1% 
TC  25